Wafer Type Pneumatic Butterfly Valve

A wafer type pneumatic butterfly valve is a type of control valve used in various industrial applications to regulate the flow of fluids (liquid or gas) in a pipeline. lt is called a "wafer type' valve because it fits between two flanges without the need for additional hardware like nuts and bolts, making it more compact and easy to install.

 

 

Here are some key features and components of a wafer type pneumatic butterfly valve!

1. Butterfly Disc: The valve has a disc or plate mounted on a spindle that rotates inside the valve body. The disc can be actuated to open or close the flow path by turning the spindle.

2. Valve Body: The body is usually made of metal or other durable materials and houses the disc. The wafer type design allows the valve to be sandwiched between flanges, securing it in place when the flanges are tightened.

3. Actuator: The pneumatic actuator is responsible for operating the valve and can be controlled remotely using compressed air or gas. The actuator will open or close the valve based on the input signals received from the control system.

4. Sealing Mechanism: The valve is equipped with sealing elements (often made of rubber or elastomer) around the disc perimeter to provide a tight seal when the valve is closed, preventing any leakage.

When the actuator receives a signal to open the valve, it rotates the disc perpendicular to the flow direction, allowing the fluid to pass through the valve. When the actuator receives a signal to close the valve, it rotates the disc back to its original position, blocking the flow.

 

 

The acceptable directions of installation butterfly valve is Horizontal and perpendicular. 

We do not recommend mounting with vertical downward direction.

 

 

Wafer type pneumatic butterfly valves are widely used in industries such as water treatment. HVAC systems, chemical processing, power generation, and many others, due to their compact design, quick actuation, and reliable performance. However, it's important to choose the right size, material, and actuation system based on the specific application requirements.

 

 

 

 

Model	ΦD	4-ΦD1	H1	H2	H3	L	L1	L2	L3	Kg
DN40	106.00	22	92	212	71	33. 5	30	147	71. 5	3. 00
DN50	123.00	22	108	238	70. 0	42	32	168	83	4. 10
DN65	142.00	22	10S	251	80. 0	45	47	168	83	4. 50
DN80	154. 50	23	120	275	94. 0	45	65	184	95	5. 80
	154.50	23
DN100	183.00	27	129	299	108. 0	52. 1	91	204	103	7. 60
DN125	212. 50	25	137	327	122. 0	55	112	262	108. 5	10. 50
DN150	240.00	24	153	363	134. 0	56	146	268	121. 5	14. 50
DN200	295.00	24	185	428	167. 0	61	194	301	142	21. 40
	296.00	25
DN250	356.00	31	202	484	203. 0	66	242	390	152	33. 20
DN300	407.00	25	227	537	241. 0	77	292	458	174	49. 60
	432.00	32
DN350	460. 00	23	260	613	267. 0	77	325	525	206	68. 50
	470. 00	26
DN400	515.00	26	285	665	310. 0	87	380	532	226	105. 60
	525.00	30
DN450	565.00	26	319	730	331. 0	105	428	602	260	140. 60
	585.00	30
DN500	620.00	26	356	824	378. 5	130	474	718	294	194. 00
	650.00	33
DN600	725.00	20-030	380	942	463. 0	152	573	760	336	307.00
	770.00	20-036

 

 

 

 

 

 

 

http://www.drtvalve.com/